CLA model





  • Frame fully reinforced according to SS3021 (UNP200), DIN30722/SFS4417 (INP180)
  • Bended at bottom straight sides 4mm (or 6mm) Hardox 450 or 4mm Hardox 500TUF
  • Bottom 90 degrees 6mm or 8mm Hardox 450 or 5mm Hardox 500TUF, 2380mm wide
  • Full reinforced front frame UNP180
  • Bottom frame profiles, support reinforcement 4pcs
  • Back beam 8mm S700
  • Top and back profiles 6mm S700
  • Front lashing hooks behind front frame 2pcs, front corner lashing hooks 2 pcs
  • Side wall lashing hooks 2t, 2pcs each side in the middle, 1 hook in back post
  • Galvanized ladder on front wall and driver side
  • Reflex decals
  • Surface treatment:
    - shot blasting sa 2.5
    - inside 60μm alkyd primer
    - outside min 120μm 2K polyurethane EN ISO 12944 C3M
  • D - combined top and side opening door with flap, hydraulic or pneumatic
  • HD – hydraulic opening top hinged door
  • HD2 - hydraulic opening top hinged door with double swing doors
  • HDD - hydraulic opening top hinged door with flap
  • G - combined top and side opening door with manual lock
  • GD -top hinged opening with double swing doors
  • Fliptop roof solutions www.fliptop.se
  • Steel plates on sides for logo stickers
  • LOGO stickers and serial numbers
  • Ladders on sides in back
    • Other extras are available on demand.


CLM model
CLA model
CLX model
RX model

Address

Osmussaare tn 8, 13811 Tallinn, Estonia

Phone
    +372 39 29393
Email

info@ecopress.ее