ESC STATIC PRESSES





Standard specification / Type ESC STATIC PRESSES:

Besides, compared to mobile compactor, larger volume of stationary compactor replaceable containers allows to load and transport larger volume of waste materials.

Stationary compactor is suitable for operation in all weather conditions at temperatures from -50oC to +50oC. Low noise level is ensured during operation. Pressing system is equipped with pressure sensors (mechanical sensors are not applied) what prevents operation failures during pressing. All compactors are fully equipped with high level safety protection, such as oil level sensors, time limit sensors and temperature sensors.

Pressure and compacting cycle time could be adjusted. All compactors meet requirements of EU directives 89/392EEC, 91/368EEC, 93/44EEC, 93/68EEC on equipment and machinery safety, and are provided with CE marking and user's manual.

Technical characteristics of stationary compactor ESC:

Type
ESC-30
ESC-35
Pressing force (max.), t 30 35
Pressure in hydraulic system, bar 180 200
Electric motor, kW 5,5 7,5
Press plate height, mm 500 500
Distance from the bottom of tunnel to the compactor bottom, mm 670 670
Loading chamber size, mm 1850x1500 1850x1500
Volume per load (without bunker), m3 2,5 2,5
Output capacity per cycle, m3 1,46 1,46
Output capacity per hour (doesn't consider containers replacement time), m3/h up to 80 up to 80
Compacting cycle, sec 62 62
Weight, kg 2500 2700


Advantages of stationary compactor: 
  • reduction of volume of waste;
  • decrease of transportation costs due to reduction of volume of waste;
  • possibility of selling of some types of recyclable waste (paper, cardboard, plastic, etc.); 
  • possibility to transport larger volume of waste at once; 
  • continuous operation process.
Materials suitable for pressing:
  • plastic, polyethylene, plastic bottles and packing;
  • household and mixed waste;
  • cellulose and other woodworking waste;
  • different waste from production facilities, warehouses and terminal;
  • cans (tin, aluminium), metal drums.
    Loading types:
  • Manual Loading;
  • Loading with bins using bin lift system;
  • Loading with forklift;
  • Loading through waste feeding channel;
  • Loading with conveyor
    Options:
  • Waste outcome block
  • Tent cover
  • Guiding rails
  • Additional remote control panel, signals 75% and 100%
  • Fastening device for replaceable container
  • Locking device
  • Sliding roof
Address

Osmussaare tn 8, 13811 Tallinn, Estonia

Phone
    +372 39 29393